TRA-SER Pro

1. Close the TRA-SER Pro application if it is open. Insert the TRA-SER Pro disk in your CD-ROM drive. If the Autoplay Control window appears, choose the Update TRA-SER data from the window and click “OK”. Skip to step 3.

2. If you receive a message reading: “This CD contains a version of TRA-SER that is newer than that installed on this machine. Do you want to UPDATE TRA-SER now?” Click on the “Yes” button. When the TRA-SER update is completed, click on the “OK” button. You will now have to double-click on the “UPDATE TRA-SER” icon (looks like a big yellow “E”) on your desktop or on the path Start > Programs > TRA-SER to continue the update process.

3. The Update TRA-SER window will appear. Click “LOAD”; the Load Update Window will appear. If the CD-ROM default drive is not correct, enter the letter of the CD-ROM drive from which you will load the Update. Note: if you get a message that you cannot access update source path, then you entered the wrong CD-ROM drive letter. Enter the correct letter and click on “OK”. Once the correct CD-ROM drive is selected, click “LOAD”. The updates will be copied to your system and will appear in the Updates loaded section of the Update TRA-SER window.

4. You will now get a message asking, “Would you like to run the highlighted update now?” Click on “Yes”. Note: all updates need to be run in sequence, therefore you must select the corresponding update that is the next in sequence in the Update Status box.

5. Click “RUN” and after the update has run, you will see a message “update complete”. Click on “OK”. The update is now complete. If you have other updates to perform, repeat steps 4 and 5 as needed.